Skip to content
Bitswrt

Contents

Spectraltool commands

  • spectraltool -i wifiX—To get the list of parameters supported and to see the current configured values
  • spectraltool -i wifiX —To change the spectraltool parameters such as fftsize, scan_periodity, scan_period and so on.
  • spectraltool -i wifiX -startscan—To enable spectral scan
  • spectraltool -i wifiX raw_data—To get the outFile with 1000 samples
  • spectraltool -i wifiX stopscan—To disable the spectral scan
  • spectraltool -i wifiX get_samples <no. of reports>—To get the required number of spectral reports in outFile

athssd commands

athssd -i wifi0 -s 0 —This command enables the athssd spectral classifier for the current channel. It gives information on Wi-Fi/FHSS/CW and MWO interference in the operating channel.